Advertisement
Quick Links
Advertisement
Related Manuals for Keysight Technologies N4877A
Summary of Contents for Keysight Technologies N4877A
- Page 1 Keysight N4877A Clock Data Recovery and Demultiplexer 1:2 Getting Started...
- Page 3 This Getting Started Brochure helps you to quickly install and check the instrument. If you need more detailed information on the N4877A, refer to the Help of your N4877A. For more information, visit www.keysight.com/find/N4877 The Help also offers printable versions of the...
-
Page 4: Safety Summary
To minimize shock hazard, the instrument chassis ESD Sensitive Device and cover must be connected to an electrical All front-panel connectors of N4877A are very sensitive protective earth ground. The instrument must be to Electrostatic Discharge (ESD). connected to the ac power mains through a... - Page 5 Power Requirements Connections of the N4877A The instrument can operate from any single-phase The N4877A is controlled via USB or LAN. When AC power source supplying 100 – 240 V in the controlling the N4877A interactively with the N4877A frequency range from 50 – 60 Hz.
- Page 6 Installing the Keysight N4877A Check the Software Status of your Serial BERT N4903B You may wish to connect a keyboard and mouse to your Serial BERT N4903B. This is not mandatory but convenient and should be done when the instrument is switched off.
- Page 7 Connect the N4877A to mains and switch it on. Connect the USB cable between the USB port of the N4877A and one of the rear USB ports of your N4903B. Rear panel view of N4903B When you connect the N4877A...
- Page 8 Installing the Keysight N4877A Installing N4877A Remote GUI Follow the given steps to install Keysight N4877A Remote GUI on N4903B. Double-click the installer (AgtN4877A.msi). This installer file will be available either on Follow the onscreen instructions CD, USB Flash drive or Web.
- Page 9 Data Out port of the pattern Input port of the N4877A. and connect the Recovered Clock Out generator using the SMA port of the N4877A with CLK IN port to 2.4 mm adapter. of the N4903B Error Detector. Using a 3.5 mm/2.4 mm...
- Page 10 This information is subject to change without notice. © Keysight Technologies 2012, 2014 Edition 2, November 2014 *N4877-91010* N4877-91010 www.keysight.com...