Controlling The Test Set With N5264A - Keysight Technologies N5280A User's And Service Manual

N5280A

Controlling the Test Set with N5264A

Controlling the Test Set with N5264A
This section will describe how to setup and operate the N5280A Frequency
Converter Test Set with the N5264A Measurement Receiver.
A N5264A must be used to control the N5280A. The N5264A Option 108 adds
an internal LO Source 26.5 GHz for testing. Refer to
page 24
You may also use an external LO Source for testing. Refer to
page 22
Figure 12 Front Panel N5280A and N5264A with Option 108
N5264A
Measurement Receiver
N5280A
Frequency Converter
RF Source
20
for cable connections.
Figure 15 on page 23
and
Figure 12
for cable connections.
Keysight N5280A User's and Service Guide
and Figure 16 on
Figure 14 on