If Out (A, B, C/R1 And D/R2) (Option 700 And 001) - Keysight Technologies N5280A User's And Service Manual

N5280A
Front and Rear Panel Features
Figure 7 Rear Panel (Option 700 and 001)
RF Jumper LO AUX (load)
Figure 8 Rear Panel (Option 002)
LO AUX (load)

IF OUT (A, B, C/R1 and D/R2) (Option 700 and 001)

LP OUT from the IF Outputs are connected to the IF Inputs on the PNA-X. The
RF Jumper (N5222-20091 was E8356-20072) is connected between LP IN and
Max BW. These connectors transmit the IF signal from the Test Set to the
N5242A 2-Port or 4-Port PNA-X and N5264A Measurement Receiver.
16
LO IN Attenuators (Option 001)
Keysight N5280A User's and Service Guide
Line Module
LP OUT
LP IN
Max BW