Connector Care And Cleaning Precautions - Keysight Technologies N5280A User's And Service Manual

N5280A
Safety and Information
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended. Discard used
batteries according to manufacturer's instructions.
For continued protection against fire hazard replace line fuse only
with same type and rating. The use of other fuses or material is
prohibited.
These servicing instructions are for use by qualified personnel only.
To avoid electrical shock, do not perform any servicing unless you
are qualified to do so
The opening of covers or removal of parts is likely to expose the user
to dangerous voltages. Disconnect the instrument from all voltage
sources before opening.
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
The detachable power cord is the instrument disconnecting device.
It disconnects the mains circuits from the mains supply before other
parts of the instrument. The front panel switch is only a standby
switch and is not a LINE switch (disconnecting device)

Connector Care and Cleaning Precautions

Remove the power cord to the instrument. To clean the connectors use alcohol
in a well ventilated area. Allow all residual alcohol moisture to evaporate, and
fumes to dissipate prior to energizing the instrument.
To prevent electrical shock, disconnect the Keysight
mains electrical supply before cleaning. Use a dry cloth or one
slightly dampened with water to clean the external case parts. Do
not attempt to clean internally.
If flammable cleaning materials are used, the material shall not be
stored, or left open in the area of the equipment. Adequate
ventilation shall be assured to prevent the combustion of fumes, or
vapors.
48
N5280A
Keysight N5280A User's and Service Guide
from