Installation Requirements; Toons Anc Parts; Location Requirements - Maytag MVWX5SPAW0 Installation Instructions Manual

INSTALLATION REQUIREMENTS
Tools and Parts To order, please refer to toll-free phone numbers on back page
Gather required tools and parts before starting installation. of your "Use and Care Guide".
Tools needed: @ 8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
@ 8212641RP = 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
@ 8212646RP = 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
@ 8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
[oS Oo] e pact
@ 8212487RP = 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
B 8212638RP _ 6 ft. (1.8 m) Nylon braided inlet hose, space
saving 90° elbow, hypro-blue steel couplings
.
(2 pack)
Adjustable or open end Level H 8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
wrench 9/16" (14 mm) saving 90° elbow, hypro-blue steel couplings
(2 pack)
4" min Alternate parts: (Not supplied with washer)
(102 mm) } lm* Your installation may require additional parts. To order, please
; \ refer to toll-free numbers on back page of your "Use and Care
oF mmm Guide".
If you have: You will need:
Wood block Ruler or measuring tape Overhead sewer Standard 20 gal. (76 L) 39" (990 mm)
tall drain tub or utility sink, sump
pump and connectors (available from
local plumbing suppliers)
SS 1" (25 mm) standpi 2" (54 diameter t o 1" (25
oO pipe ( 5 1 mm) diameter to 1" ( 2 5 mm)
—— diameter Standpipe Adapter
Part Number 3363920
Connector Kit Part Number 285835
Optional tools:
Lint clogged drain Drain Protector Part Number 367031
Connector Kit Part Number 285835
LOCATION REQUIREMENTS
Select proper location for your washer to improve performance
and minimize noise and possible "washer walk". Install your
NOTE: All parts supplied for installation are in washer in a basement, laundry room, closet, or recessed area.
cardboard insert in the top of the washer.
e— 27 1/2" me zt
_t (699 mm) _| (686 mm),
42"
(1067 mm)
Flashlight Bucket
Parts supplied:
Drain hose with clamp,
U-form, and cable tie
Parts needed: (Not supplied with washer)
Inlet hoses with
flat washers