Figure 9-66: Abd Option Test Selection Screen - Ametek i Series User Manual

User Manual
9.9.5 CIGui32 ABD Control Window
To access the –ABD option, select the Airbus ABD Tables from the Applications menu of the
CIGui32 main screen or click on the ABD button in the toolbar. The ABD Tables control window
will open selecting the power group that most closely matches the steady state values set. It
may still be necessary to select the desired power group first however. Also verify that the
selected power group in the ABD screen is the correct one for the EUT being tested.
The ABD tests can be operated from the ABD test screen. This screen contains three main tabs
located along the top edge of the window. The following tabs are available. Click on the tab name
for additional help on how to use each tab.
Tab
Test Selection
Test Control
i Series / iX Series

Figure 9-66: ABD Option Test Selection Screen.

Description
This tab allows the operator to select the library of test files to use (Select
Airframe) and the relevant Power group. It also displays the AC power source
settings that are in effect on the right hand side. Available power group
selections are A,B and C for AC products and D and E for DC products. The
table shown at the bottom of this tab shows the available test sections that can
be selected. This table matches the test tables A through E of the
ABD0100.1.8 test standard.
This tab provides information on the test sequence that is presently selected
and also contains the execution controls. It shows the progress of any test that
is executing.
293