Unpacking And Installation; Unpacking; Power Requirements; Figure 3-1: The 5001Ix Power Source - Ametek i Series User Manual

User Manual

3. Unpacking and Installation

3.1 Unpacking

Inspect the unit for any possible shipping damage immediately upon receipt. If damage is
evident, notify the carrier. DO NOT return an instrument to the factory without prior approval. Do
not destroy the packing container until the unit has been inspected for damage in shipment.
WARNING: This power source weighs 61 lb (28kg). Obtain adequate help when
moving or mounting the unit.

3.2 Power Requirements

The 3001i/iX AC Power Source has been designed to operate from a single-phase 208 to 240
volt AC line. The 5001i/iX AC Power Source and its systems have been designed to operate
from a three-phase AC line voltage. Three three-phase input models are available for inputs of
208-240 V , 400-440 V
LL
CAUTION: Do not connect 400-480V into the 208-240V unit, the result could be a
severely damaged unit.
i Series / iX Series
(option -400), or 400-480 V
LL

Figure 3-1: The 5001iX Power Source

(option -400).
LL
15