User Manual
3.6.3 RS232C Serial Interface Connector – J18
Pin
1
2
3
4
5
6
7
8
9
To connect the 5001iX to a PC‟s 9-pin DB9 serial port, a special RS232 cable is required. A 6
foot / 2 meter long cable (CI P/N 7000-263-1) is supplied in the iX Series ship-kit. The wiring
diagram for this cable is shown below in case a longer cable has to be constructed. Alternatively,
a generic straight thru DB9 male to DB9 female cable can be used to extend the supplied cable.
3.6.4 I/O Option – J58
This connector is reserved for control of the EOS option. Do not connect anything else to this
connector.
i Series / iX Series
Table 3-4: RS232C Connector
N/C
RxD, Receive data
TxD. Transmit data
DTR, Data Terminal Ready
Common
N/C
RTS, Request to Send
N/C
N/C
Figure 3-2: RS232C Cable for PC Connection wiring diagram.
21