Replacing The Battery - MG GS Handbook

Note: Any key made independently outside of the MG
authorised Repairer may not start the engine, and may
affect the safety of your car. To obtain a suitable key
replacement, it is recommended that you can consult
MG Authorised Repairer.
Note: The new key cannot be offered to you
immediately because it requires programming to the
vehicle by the MG Authorised Repairer.
Note: Avoid operating the remote key close to strong
radio interference devices. (such as computer and
other electronic products), or the normal function of
the key may be affected.

Replacing the Battery

Please replace remote key battery in the following
conditions:
• The keys locking/unlocking function range is reduced.
• The engine immobilisation warning lamp on the
instrument pack flashes, and the information centre
display shows "Remote Key Low Battery, Please
Replace".
Starting & Driving
1 Unfold the remote key.
2 Carefully prise off the key cover (1).
3 Press the battery slightly and push it forward (A) to
take out the battery (2).
4 Fit the new battery, ensuring that correct polarity is
maintained ("+" side facing up), slide it backward (B).
4
163