MG GS Handbook page 233

control system will maintain the set speed without
pressing the accelerator pedal.
Note: The set speed held in the cruise control memory
will be canceled when either the cruise control lever is
switched to "Stop" position (7) or the ignition switch
turned off.
Target Cruise Speed Adjustment
When the cruise control is active:
Push the lever upwards (1) and hold, this will increase the
speed. Release the lever switch when the desired speed is
reached.
Push the lever downwards (2) and hold, this will decrease
the speed. Release the lever switch when the desired speed
is reached.
In addition, the set
increased/decreased by turning the lever and then
releasing; push the lever switch upwards (1) or downwards
(2) briefly to increase/decrease the vehicle speed. Turning
the lever once will increase/decrease the speed appr.
1km/h.
Starting & Driving
speed can be gradually
When the cruise control system is in operation, the vehicle
still can be accelerated by pressing the accelerator pedal
(such as overtaking). Releasing the accelerator will return
the vehicle to the set target speed.
Pause
When the cruise control system is activated, the following
operations will bring the system to Standby state:
• Lever switch moved to 'Cancel' position (3).
• Brake pedal pressed.
• Auto gear lever moved to P, R or N.
• The poor road condition brings the stability control
system (SCS) into operation. For safety reasons, the
cruise control system will automatically exit to Standby
state.
• When the abrupt hill results in the excessive decrease of
the speed, the cruise control system shall automatically
exit to Standby state.
• Electronic parking brake (EPB) is operated in an
abnormal manner.
4
219