Stopping The Engine - MG GS Handbook

Hide thumbs Also See for GS:
Table of Contents

Advertisement

Stopping the Engine

Operation of stopping the engine as follows:
1 After bringing the car to a stop, ALWAYS apply the
parking brake;
2 To apply the parking brake;
3 Place the shift lever in P position;
Note: If the parking brake is applied but the shift
lever is not fully in parking (P) position, then it
is very dangerous to get off. The car may move
suddenly to injure yourself or others when you
start the engine.
4 For key start vehicle, turn the key from ON/RUN
position to LOCK/OFF position to stop the engine,
and remove the key.
5 For passive start vehicle, press ENGINE START/STOP
button to stop the engine.
Note: For passive start vehicle, when the engine
needs to be stopped in emergency, press the ENGINE
START/STOP button for more than 4 seconds to stop
the engine.
180
Starting & Driving
Note:
speed (particularly in hot weather), it is suggested
to allow the engine to idle for a few minutes before
switching off, which enables the cooling system to
work continuously to lower the engine temperature.
After strenuous towing or driving at high

Advertisement

Table of Contents
loading

Table of Contents