Lighting Lever Switch - MG GS Handbook

Hide thumbs Also See for GS:
Table of Contents

Advertisement

Lighting Lever Switch

Take care not to dazzle oncoming vehicles
when
switching
headlamps and dipped beam headlamps.
Direction Indicators
Move the lever down to indicate a LEFT turn (1). Move the
lever up to indicate a Right turn (2). The corresponding
Instruments and Controls
between
main
beam
GREEN indicator lamp in the instrument pack will flash
when the turning signal lamps are working.
After resetting the steering wheel, the lever will be
automatically reset, and the turning signal lamps go off.
But if the steering wheel angle is small, manually reset the
lever to turn off the turning signal lamps. If the lever angle
is small, it will be reset immediately. And the turn signal
lamps and direction indicators flash three times and then
automatically go off.
Main/Dipped Beam Headlamps Switching
With the ignition switch in position ON and the master
light switch turned to position 3, push the lever (3) towards
the instrument panel to operate main beams. The warning
light in the instrument pack illuminates to indicate Main
Beam On when the headlights are on main beam. Push the
lever (3) once again to switch to dipped beam headlamps.
Main Beam Flash
To briefly flash the main beam on and off, pull the lever
towards the steering wheel (4) and then release.
1
35

Advertisement

Table of Contents
loading

Table of Contents