Table of Contents
Advertisement
Economic and Environment-Friendly
Driving Mode
Running-in
The engine, transmission, brakes and tyres need time to
'bed-in' and adjust to the demands of everyday motoring.
During the first 1,500 km, it is essential that you drive
with consideration for the running-in process and heed the
following advice:
• Do not allow the engine to exceed 3000 rpm in any gear
or the vehicle speed to exceed 120 km/h.
• Do not operate at full throttle or allow the engine to
labour in any gear.
• Do not drive at a constant speed (either high speed or
low speed).
• Avoid heavy braking where possible.
After 1,500 km, engine speeds can be gradually increased.
Environment Protection
Your car has been designed with the latest technology in
order to minimise the environmental impact of exhaust
emissions.
Starting & Driving
Economic Driving
The way in which you drive your car has a significant
bearing on the life span of the car, as well as affecting the
environmental pollution and the fuel consumption:
Warming up the engine according to the surrounding
temperature. Warming up long time will not only reduce
the fuel economic, but also increase the pollution of
environment.
Note that rapid acceleration and sudden increase of engine
load before reaching the normal operating temperature
may damage the engine.
Choosing Appropriate Gear
Choose appropriate gear according to the road condition.
Avoid engine in drag gear or over running.
Driving Smoothly
A smooth driving style on the road can consume less oil
than frequent acceleration and harsh braking. Avoid rapid
acceleration, sudden starting and heavy braking. Steady,
rather than rapid, acceleration uses considerably less fuel,
4
181
Advertisement
Table of Contents
