Table of Contents
Advertisement
Seat Belt Maintenance
Seat belt repairs and removal should only be
carried out by an MG Authorised Repairer.
The repair of a seat belt component must
be carried out by the manufacturer trained,
dealer technicians. In the event of accidents,
improper maintenance may cause seat belt
pre-tensioners not to be activated normally
to increase accident injury risk. For better
guarantee of your safety, we recommend you
consult an MG Authorised Repairer.
Ensure no foreign or sharp objects become
lodged in the seat belt mechanisms.
not allow liquids to contaminate the seat
belt buckle, this could affect the buckle
engagement.
Seat belts should only be cleaned with warm soapy water.
Do not use any solvent to clean the seat belt. Do not
attempt to bleach or dye the seat belt, it may weaken the
seat belt. After cleaning, wipe with a cloth and allow to
136
Seats & Restraints
dry. Do not allow the seat belt to fully retract before it is
completely dry. Keep seat belts clean and dry.
If there are contaminants accumulated in the retractor, the
retraction of the seat belt will be slow. Please use a clean
and dry cloth to remove any contaminants.
Replacing Seat Belts
Do
Seat belts should not require change after minor collisions.
However, some other parts of the seat belt system, like
metal tab, buckle, retractor, etc, may be deformed or
damaged in the collision. Please go to an MG Authorised
Repairer for repair or replacement of seat belt assembly.
Collision accidents may damage the seat belt
system. The seat belt system may not be
able to protect users after damage which may
result in serious injury or even death. After
an accident, seat belts should be checked and
replaced as needed immediately.
Advertisement
Table of Contents
