Replacing The Battery - MG GT Manual

Replacing the Battery

Please use the picture guide to replace the smart key
battery if any of the following conditions occur:
• The smart key locking/unlocking function range is
reduced;
• The engine immobilisation warning lamp on the
instrument pack flashes.
icon (refer to "Warning Lights and Indicators" in
"Instruments and Controls" chapter) will be shown on
the message centre display. "Smart Key Not Found"
may be displayed for some models.
128
Starting & Driving
The corresponding alarm
A
C
1 Press the button (A) on the smart key to eject the
decorative trim.
2 Remove the backup mechanical key (B) in the arrowed
direction.
3 Using a suitable flat bladed tool, insert the tool into
the side of the key (C), carefully prise off the battery
cover and separate the upper and lower casings (D).
4 Remove the battery from the slot.
B
D