Replacing The Battery - MG ZS Series Manual

Table of Contents

Advertisement

key can be deactivated. If the lost key is found, an MG
Authorised Repairer can reactivate it.
Note: Any key made privately may not start the
vehicle, and may affect the safety of your car. To
obtain a suitable key replacement, it is recommended
that you can consult an MG Authorised Repairer.
Note:
The new key cannot be offered to you
immediately because it requires programming to the
vehicle by the MG Authorised Repairer.
Note:
Avoid operating the smart key close to
strong radio interference devices (such as notebook
computers and other electronic products), the normal
function of the key may be affected.

Replacing the Battery

Please use the picture guide to replace the smart key
battery if any of the following conditions occur:
• The smart key locking/unlocking function range is
reduced;
• The message centre will display "Remote Key Low
Battery, Please Replace".
STARTING & DRIVING
A
C
1 Press the button (A) on the smart key to eject the
decorative trim.
2 Remove the backup mechanical key (B) in the arrowed
direction.
3 Using a suitable flat bladed tool, insert the tool into
the side of the key (C), carefully prise off the battery
cover and separate the upper and lower casings (D).
4 Remove the battery from the slot.
B
D
125
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents