Lock-Mode Button; Lock-Mode On/All-Wheel Drive System Malfunction Indicator Lamp - MG GS Handbook

Hide thumbs Also See for GS:
Table of Contents

Advertisement

Lock-mode Button

Press the button to enter the Lock-mode, then the
Lock-mode ON indicator illuminates green while the
message centre display shows "Lock-mode ON"; press the
button again to enter the Auto-mode, and the indicator
goes off.
In the Lock-mode, when the car speed exceeds 60km/h,
the current mode is deactivated, the indicator goes off, and
the all-wheel drive system enters Auto-mode; if the car
Starting & Driving
speed reduces below 60km/h again, the Lock-mode won't
resume.
After activating the Lock-mode, switch off the ignition.
If the ignition is switched to ON within 1 minute, the
Lock-mode will stay; if the ignition is switched again to ON
after 1 minute, the all-wheel drive system will enter the
Auto-mode.
Lock-mode On/All-wheel Drive System
Malfunction Indicator Lamp
Lock-mode, and it goes off in the Auto-mode.
After replacement by non-full-scale spare
tyres, the all-wheel drive system malfunction
indicator lamp illuminates yellow when the
car is in motion, and the Lock-mode is
disabled.
After replacement by full-scale
spare tyres again, the indicator lamp goes
off when the car is in motion.
The indicator lamp illuminates green in the
4
201

Advertisement

Table of Contents
loading

Table of Contents