Table of Contents
Advertisement
Instruments and Controls
of the sunroof starting point is finished when the sunroof
glass shakes.
Thermal Protection
To prevent the motor from being damaged by overheating,
the sunroof will start the thermal protection after the
continuous operation of about 120 seconds. The cooling
time is about 20 seconds.
After the thermal protection is active, the sunroof can
receive a switch-off command. It will not respond to the
operations other than the switch-off until the thermal
protection time set for the sunroof is reached.
If the sunroof is still needed to operate after the thermal
protection of the sunroof is over, at this moment the
sunroof will start the thermal protection again after the
continuous operation of about 35 seconds, and the cooling
time is about 150 seconds.
52
Advertisement
Table of Contents
