Table of Contents
Advertisement
Step by Step
Operating the Telephone with the optiPoint display module
Status Message for Multiple Lines
Display of Line Information for a Ringing Line Dur-
ing a Call
Prerequisite: The Show interline state function must
be activated (see
If more than one line is required for line status messag-
es, the following rules apply for the display:
•
The lines are combined according to status and, de-
pending on priority, are displayed in accordance with
the rules described on
•
Each status that applies to a line is represented sole-
ly by the status icon (
•
Each status that applies to more than one line is rep-
resented by both the appropriate status icon
(
page 183) and the number of lines for this sta-
tus.
Secretary
Mon 07/03/05 11:34AM
Bill Smith
987654321
Jill Hill
Consult/Transfer
In the above example, two lines are ringing (including
the one currently displayed); lines with lower priority
status are only displayed if the calls are answered (by
another telephone) or cleared down.
You can answer the ringing line currently being dis-
played or switch to line overview mode and select a dif-
ferent line that is in call waiting mode, ringing or on hold.
page 107).
page 182.
page 183) .
00:24
2
Manager
197
Advertisement
Table of Contents
