Introduction; Overview - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Introduction

Overview

The optiPoint 410/420 advance S V7.0 is a modern multi-functional IP
telephone. It is designed for connection to data networks and is not direct-
ly connected with an ISDN system or to the PSTN.
This manual describes how to use the optiPoint 410/420
advance S V7 .0 when it is connected to HiPath 8000 from Siemens.
Some of the features described in this manual are only available be-
cause they are provided by HiPath 8000. If you are not using the op-
tiPoint 410/420 advance S V7 .0 in a HiPath 8000 environment, con-
tact the administrator to obtain the corresponding operating
manual.
The optiPoint 410/420 advance S V7 .0 enables voice communication via
the standard Internet Protocol (IP). It is compatible with the signaling stack
in compliance with the SIP (Session Initiation Protocol) protocol specifica-
tion.
The optiPoint 410/420 advance S V7 .0 can be used just like a conventional
telephone – the only difference being that your calls are directed via a data
network. The telephone has an Ethernet interface so that when using the
TCP/IP protocol, you can make the telephone calls both via your own intra-
net and via the worldwide Internet.
The optiPoint 410/420 advance S V7 .0 also supports other standard proto-
cols, which optimizes the data and voice transmission and simplifies the
administration of the unit. For example, the administrator can download
updates for equipment software or feature enhancements to the optiPoint
410/420 advance S V7 .0 via the FTP server.
The optiPoint 410/420 advance S V7 .0 features a four-line display and spe-
cial dialog keys, which allow user-friendly navigation through the menu
structure of the unit's software. A wide variety of features and programma-
ble keys enable you to configure the telephone individually to meet most
requirements.
Introduction
15