Logging On And Off At The Same Telephone; Logging On At The Telephone - Siemens HIPATH 8000 OPTIPOINT410 User Manual

DLS Mobility Function
Step by Step
Mobility
>
11=Mobility?
1=Log on?
86
Logging on and off at the Same
Telephone

Logging on at the Telephone

No other mobility user is logged on.
Logging on using the key
One of the function keays was set up as logon key for
the mobility function.
Press the "Mobility" logon key. You are asked to enter
your "Mobility ID".
or Logging on using the menu
:
Select and confirm.
>
:
Confirm to start the logon procedure.
>
o
Enter your Mobility ID (in general, this is the same as
your official telephone number).
o
Enter your User password (default value: "000000").
The following messages appear on the display:
• "Mobility logon: Validating request"
• "Mobility logon: Registering..."
• "Downloading user data"
When the logon procedure is completed, the LED of
the "Mobility" key is on, and MOB is shown on the dis-
play. If you press the "Mobility" key again, you are
logged off (
connected, a tent-like symbol is diplayed in the top sym-
bol bar (
If an optiPoint display module is connected and
you use a different language setting as "mobility
user", you are asked to Restart
telephone so that the change of language setting
can also be done for the optiPoint display mod-
ule.
page 87). If an optiPoint display module is
page 132).
page 130) the