Using Repdial Keys; Repertory Dialing - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Operating the Telephone with the optiPoint display module
Step by Step
Frank Miller
156

Using Repdial Keys

If you press a selected dialing key with a stored number
(see page 121), the number appears in the Caller Box.
Press the programmed function key.
Call Control
Mon 07/03/05 11:34AM
12345678
Calling
The stored number is displayed and dialed. When the
connection is established, you are in speakerphone
mode.

Repertory Dialing

With repertory dialing, you can enter dial control func-
tions at any point in the repertory dialing sequence.
HiPath 8000 automatically detects whether the digits
represent an IP address, a number, or a URL.
Control Action During Dialing
Function
OK Any characters following this control func-
tion are sent immediately after the call has
been answered, and are sent as DTMF .
Pause Waits 3 seconds before sending any char-
acters following this control function.
Consult Establish a consultation call at this point.
Clear Clear the current call at this point.
For information on programming a repdial key see
page 119.