Putting Second Call On Hold; Answering A Call On Another Line - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Siemens ip phone user manual
Table of Contents

Advertisement

Operating the Telephone with the Display
Step by Step
>
Hold?
Reconnect?
30

Putting second call on hold

If you have taken a second call, you can also place it on
hold, e.g. in order to consult with someone in the same
room. In this case both parties are put on hold.
Prerequisite: You have answered the second call
(
page 28).
:
Select and confirm. The second call is held.
>
:
Confirm in order to return to the second call.
>
You can also terminate or transfer the second call now
or speak to the other parties in turn.

Answering a Call On Another Line

If you are making a call on a multiline telephone, incom-
ing calls on other lines are signalled by a line key.
The administrator can configure one of the following op-
tions for your telephone:
No ring when active on the telephone
An advisory tone (a quieter ring tone than usual)
while you are conducting a call
To answer a call on another line, you can press the line
key that is alerting. The current call is automatically
placed on hold. You can also refuse or deflect the call as
described on
page 28.

Advertisement

Table of Contents
loading

Table of Contents