Ending A Call; Switching To Speakerphone Mode; Switching To The Handset - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Operating the Telephone with the Display
Step by Step
Loudspeaker
Cancel/Rel.
>
Disconnect?
Loudspeaker
Loudspeaker
26

Ending a Call

Press key. LED goes out.
or
Press Cancel/Rel.
or
:
Select and confirm.
>

Switching to Speakerphone Mode

Prerequisite: You are conducting a call with the hand-
set.
t
and
Hold down the key while replacing the handset. Then
release the key.
Proceed with the call.
Country Options set to US
In case you have set the country options to US, you do
not have to hold the loudspeaker key to switch to spea-
kerphone mode while replacing te handset.
Press key.
t
Replace the handset and proceed with the call in spea-
kerphone mode.

Switching to the Handset

Prerequisite: You are conducting a call in speaker-
phone mode.
n s
and Lift the handset. Continue the call.
If the call has been terminated by the other party,
the message "Cleared" appears in the display.