Table of Contents
Advertisement
Step by Step
Do Not Disturb
Do Not Disturb
Do Not Disturb
Operating the Telephone with the Display
Using a Key to Activate/Deactivate Do Not
Disturb
Prerequisite: A function key must be configured (see
page 117).
Press the "Do Not Disturb" key.
The LED is on.
This setting remains in effect as long as the LED
is on.
If there is an incoming call, the caller will receive busy
treatment (tone or announcement), depending on the
system setup. However, calls for pickup groups will still
be put through.
The Do Not Disturb LED blinks.
To deactivate the function, press the "Do Not Disturb"
key again.
The LED goes out.
Do Not Disturb can also be switched on or off by
pressing the Do Not Disturb key during a call.
59
Advertisement
Table of Contents
