Recording A Call; Starting Manually; Stop Recording - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Step by Step
>
Start Recording?
>

Stop Recording?

Recording a Call

You can record important calls to be able to supply evi-
dence about the exact wording of an order (e.g. for
banking transactions).
This function can currently only be used with non-
secure voice transmission,
Prerequisite: The connection to ASC Call Recording
(EVOip) was entered at your telephone by the service
personnel

Starting Manually

If a technician has not activated automatic starting,
you need to start the recording manually.
During a call either
press the Record key that was set up
or
:
select and confirm. The recording is started, and the
>
display shows "Recording" and the number of the oth-
er party. The other party is notified via an audio note
that the call is being recorded (has to be set up by the
service personnel).
Stop Recording
Press the Record key
or
:
select and confirm. The recording is stopped.
>
The recording is also stopped if the call is terminated.
Searching for and replaying the calls can e.g. be done
using the widely known ASC applications POWERplay,
WEBplay, or INSTANT WEBplay.
Operating the Telephone with the Display
page 112.
51