Operating the Telephone with the Display
Surviveability
If a HiPath 3000 fallback system was set up for your HiPath 8000,you will
still be able to use your telephone and the functions of the outage system
in case of e.g. a power outage.
If your telephone has no connection to the HiPath 8000, it will automatical-
ly connect to the HiPath 3000 fallback system. The message "Temporary
limited mode" is displayed.
While you are using the fallback system, the following functions are not
available:
•
•
•
•
•
•
•
•
•
•
•
•
•
Hot- and Warmline Function
Your service personnel can set up a hot or warm line for your or a specific
telephone.
If you pick up the receiver or press the loudspeaker key on this telephone,
the preset number is dialled
•
•
Examples:
•
•
62
Call Forwarding (
Deflecting a Call (
Conferencing (
page 49)
Voice Messages (
Reachability (
page 37)
Callback (
page 36)
Using Group Features (
Multiline Telephone – Introduction (
Call Display (
page 97)
Transferring without Consultation (
Lock Phone with Forward (
Delay for Call Forward on No Reply (
HiPath 8000 Functions (
immediately in case of a hot line;
after a preset period of time in case of a warm line.
The elevator telephone is set to immediately dial the front desk's tele-
phone number.
The telephone next to an in-patient's bed is set to dial the ward's tele-
phone number after e.g. 1 minute if no other number is dialled.
page 43)
page 27)
page 57)
page 60)
page 63)
page 32)
page 115)
page 71)
page 99)