Customizing the Telephone
Step by Step
>
35=Auto Reconnect Beep?>
Switch on?
>
36=Idle display static?
1=Cycle/Flash?
>
2=Static?
>
38=Inactivity timeout?
1=No timeout?
>
2=30 seconds?
>
3=1 minute?
104
Beep on Auto Reconnect
You can use this option to specify whether you will hear
a beep when a call is automatically reconnected.
Prerequisite: You are in the "Configuration" menu
page 91.
:
Select and confirm.
:
Confirm. The new setting is displayed.
>
Idle State Options
System messages are displayed in the fourth line of the
optiPoint 410/420 advance S V7 .0.
Prerequisite: You are in the "Configuration" menu
page 91.
:
Select and confirm.
>
:
Confirm. If multiple messages are received, they are
>
displayed alternately.
or
:
Select and confirm. The message with the highest pri-
>
ority is displayed even if multiple messages have been
received. If there are several messages, a plus sign is
visible behind the current message. You can switch be-
tween messages using the plus/minus key.
Inactivity Timeout
Use the timeout setting to specify the period of inactiv-
ity after which the telephone will automatically revert to
the idle state.
Prerequisite: You are in the "Configuration" menu
page 91.
:
Select and confirm.
>
:
Confirm.
>
or
:
Select and confirm.
>
or
:
Select and confirm.
>