Table of Contents
Advertisement
Operating the Telephone with the Display
Step by Step
Answer call?
Line
66
Using a Multiline Setup
Incoming Call (Ringer or Call Waiting Tone)
The optiPoint 410/420 advance S V7 .0 rings with the set
ring tone
If information about the calling party is transferred
(name, number or both), it appears on the display.
n
You can now lift the handset and talk with the person
calling.
On multiline telephones, the line being signaled
is automatically selected when you lift the hand-
set. If more than one line is alerting, you are con-
nected to the line that has been ringing the long-
est.
or
:
Confirm Answer call and then lift the handset or use the
>
speakerphone.
or
Press the blinking line key before you lift the handset or
before using the speakerphone.
Outgoing Calls
Off-hook dialing
Initiate a call by:
•
Pressing a free line key on the multiline telephone
Pressing the Loudspeaker key
•
•
Lifting the handset
On-hook dialing
You can start entering the number immediately. The
connection is established via the next available line.
page 126.
Advertisement
Table of Contents
