Line Key Status Indication; Direct Station Select Key Status Indication - Siemens HIPATH 8000 OPTIPOINT410 User Manual

Line Key Status Indication

LED Line status
OFF Idle
BLINKING Call waiting mode.
RAPIDLY
FLICKERING Held.
BLINKING Idle (forwarded)
SLOWLY
BLINKS Idle (forwarded)
SLOWLY
ON Busy (local)
Busy (remote station)
FLICKERING All
WEAKLY
(1) In the case of a line for which a call is waiting, call waiting mode is maintained so that in-
formation on the waiting call remains displayed.
(2) A call may already be connected to the line for which a new call is waiting. This is referred
to as "Call Waiting". The connection can be active or held
(3) The LED indicator on the prime line key indicates immediate forwarding instead of an idle
line.
(4) Only if activated by administrator.
(5) An active call is connected to the multiline telephone. A call is connected to the other tele-
phone.

Direct Station Select key Status Indication

LED Line status
OFF Idle
ON Busy
BLINKING Incoming call
Description
No connected calls.
A new incoming call/possible callback is wait-
(1)or (2)
ing.
A call held in a queue that can be answered
by the multiline telephone.
The line is forwarded immediately (prime line
only)
A secondary line is forwarded immediately
(HiPath 8000 forwarding)
(5)
The line is seized by a connection to the mul-
tiline telephone.
(4)
The line is seized by a connection to another
multiline telephone.
The line appears on the display, i. e. it is busy.
Description
The line assigned is not used.
The main line of the target telephone is busy.
An incoming call is waiting on the main line of
the target telephone.
(3)
Appendix
(4)
235