Displaying And Maintaining Gvrp - H3C SR8800 Configuration Manual

10g core routers layer 2 - lan switching
Hide thumbs Also See for SR8800:
Table of Contents

Advertisement

Step
5.
Configure the Join timer.
6.
Configure the Leave timer.
As shown in
If you want to set a value beyond the value range for a timer, you may change the value range by
tuning the value of another related timer.
If you want to restore the default settings of the timers, restore the Hold timer first, and then the Join,
Leave, and LeaveAll timers.
Table 16 Dependencies of GARP timers
Timer
Hold
Join
Leave
LeaveAll
NOTE:
To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller than its
default value (1000 centiseconds).

Displaying and maintaining GVRP

Task
Display GARP statistics on ports.
Display GARP timers on ports.
Display the local VLAN information
maintained by GVRP on ports.
Display the current GVRP state in the
specified VLANs on ports.
Display GVRP statistics on ports.
Table
16, the value ranges for GARP timers are dependent on one another:
Lower limit
10 centiseconds
No less than twice the Hold timer setting
Greater than twice the Join timer setting
Greater than the Leave timer setting
Command
garp timer join timer-value
garp timer leave timer-value
Upper limit
No greater than half of the Join timer setting
Less than half of the leave timer setting
Less than the LeaveAll timer setting
32765 centiseconds
Command
display garp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display garp timer [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display gvrp local-vlan interface
interface-type interface-number [ | { begin
| exclude | include } regular-expression ]
display gvrp state interface interface-type
interface-number vlan vlan-id [ | { begin |
exclude | include } regular-expression ]
display gvrp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
113
Remarks
Optional.
The default setting is 20
centiseconds.
Optional.
The default setting is 60
centiseconds.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view

Advertisement

Table of Contents
loading

Table of Contents