Step
2.
Enter interface view or port
group view.
3.
Configure the link type of the
port or ports as access.
4.
Assign the current access
port(s) to a VLAN.
NOTE:
Before assigning an access port to a VLAN, create the VLAN first.
•
In VLAN view, you can assign only Layer 2 Ethernet interfaces to the current VLAN.
•
Assigning a trunk port to a VLAN
A trunk port can carry multiple VLANs. You can assign it to a VLAN in interface view (including Ethernet
interface view, Layer 2 aggregate interface view, and Layer 2 VE interface view) or port group view.
To assign a trunk port to one or multiple VLANs:
Step
1.
Enter system view.
Command
•
Enter Ethernet interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate
interface view:
interface bridge-aggregation
interface-number
•
Enter Layer 2 virtual Ethernet
interface view:
interface ve-bridge
interface-number
•
Enter port group view:
port-group manual
port-group-name
port link-type access
port access vlan vlan-id
Command
system-view
9
Remarks
Use any one of the commands.
Optional.
The link type of a port is access by
default.
Optional.
By default, all access ports belong
to VLAN 1.
Remarks
N/A