Table of Contents
Advertisement
Configuring GVRP
The Generic Attribute Registration Protocol (GARP) provides a generic framework whereby network
devices in a bridged LAN, such as end stations and switches, can register and deregister attribute values.
The GARP VLAN Registration Protocol (GVRP) is a GARP application that registers and deregisters VLAN
attributes. GVRP uses the operating mechanism of GARP to maintain and propagate dynamic VLAN
registration information for the GVRP devices on the network.
Introduction to GVRP
GARP
GARP provides a mechanism that allows participants in a GARP application to distribute, propagate,
and register with other participants in a LAN the attributes specific to the GARP application, such as the
VLAN or multicast address attributes.
How GARP works
Each port that participates in a GARP application (GVRP for example) is a GARP participant.
Through the GARP mechanism, the attribute information of GARP participants is rapidly propagated
across the entire LAN. As shown in
information with other GARP participants by sending and withdrawing declarations, and registers and
deregisters the attribute information of other participants according to the declarations and withdrawals
it receives.
Figure 39 How GARP works
For example, GVRP registers and deregisters VLAN attributes as follows:
•
When a port receives a declaration for a VLAN attribute, it registers the VLAN attribute carried in
the declaration, and joins the VLAN.
When a port receives a withdrawal for a VLAN attribute, it deregisters the VLAN attribute carried
•
in the withdrawal, and leaves the VLAN.
GARP messages
A GARP participant exchanges information with other GARP participants by sending GARP messages,
including Join, Leave, and LeaveAll. These messages work together to ensure the registration and
de-registration of attribute information. As a GARP application, GVRP also uses GARP messages for
information exchange.
Figure
39, a GARP participant registers and deregisters its attribute
107
Advertisement
Table of Contents
