Displaying And Maintaining Gvrp; Gvrp Configuration Examples; Gvrp Configuration Example I - H3C S5500-SI Series Operation Manual

Operation Manual – VLAN
H3C S5500-SI Series Ethernet Switches
Timer
Join
Leave
LeaveAll

3.4 Displaying and Maintaining GVRP

Display statistics about
GARP
Display GARP timers for
specified or all ports
Display the local VLAN
information maintained by
GVRP
Display the current GVRP
state
Display statistics about
GVRP
Display the global GVRP
state
Display the information
about dynamic VLAN
operations performed on
a port
Clear the GARP statistics

3.5 GVRP Configuration Examples

3.5.1 GVRP Configuration Example I

I. Network requirements
Configure GVRP for dynamic VLAN information registration and update among devices,
adopting the normal registration mode on ports.
Not less than two times the hold
timer setting
Greater than two times the join timer
setting
Greater than the leave timer setting
To do...
display garp statistics
[ interface interface-list ]
display garp timer
[ interface interface-list ]
display gvrp local-vlan
interface interface-type
interface-number
display gvrp state
interface interface-type
interface-number vlan
vlan-id
display gvrp statistics
[ interface interface-list ]
display gvrp status
display gvrp
vlan-operation interface
interface-type
interface-number
reset garp statistics
[ interface interface-list ]
Lower limit
Use the command...
3-7
Chapter 3 GVRP Configuration
Upper limit
Less than half of the leave
timer setting
Less than the LeaveAll
timer setting
32765 centiseconds
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view