Table of Contents
Advertisement
[DeviceB-GigabitEthernet4/1/1] quit
# Create VLAN 3 (a static VLAN).
[DeviceB] vlan 3
[DeviceB-vlan3] quit
Verify the configuration:
3.
Use the display gvrp local-vlan command to display the local VLAN information maintained by
GVRP on ports. For example:
# Display the local VLAN information maintained by GVRP on port GigabitEthernet 4/1/1 of
Device A.
[DeviceA] display gvrp local-vlan interface GigabitEthernet 4/1/1
Following VLANs exist in GVRP local database:
1(default)
According to the output above, information about VLAN 1 is registered through GVRP, but static
VLAN information of VLAN 2 on the local router and dynamic VLAN information of VLAN 3 on
Device B are not.
# Display the local VLAN information maintained by GVRP on port GigabitEthernet 4/1/1 of
Device B.
[DeviceB] display gvrp local-vlan interface GigabitEthernet 4/1/1
Following VLANs exist in GVRP local database:
1(default)
According to the output above, information about VLAN 1 is registered through GVRP, but static
VLAN information of VLAN 3 on the local router and dynamic VLAN information of VLAN 2 on
Device A are not.
118
Advertisement
Table of Contents
