Configuring Load Sharing Criteria For Link Aggregation Groups; Displaying And Maintaining Ethernet Link Aggregation - H3C SR8800 Configuration Manual

Configuring load sharing criteria for link
aggregation groups
You can determine how traffic is load-shared in a link aggregation group by configuring load sharing
criteria. The criteria can be MPLS labels, service port numbers, IP addresses, MAC addresses, or
receiving ports carried in packets, or any combination.
To configure the global link-aggregation load sharing criteria:
Step
1. Enter system view.
2. Configure the global link-aggregation load
sharing criteria.
NOTE:
Only SPC cards support the configuration of link-aggregation load sharing criteria. Even though you can
configure the link-aggregation load-sharing mode command on SPE cards, the command does not take
effect.
Displaying and maintaining Ethernet link
aggregation
Task
Display information for an
aggregate interface or multiple
aggregate interfaces.
Display the local system ID.
Display the global
link-aggregation load sharing
criteria.
Display detailed link aggregation
information for link aggregation
member ports.
Display summary information
about all aggregation groups.
Command
system-view
link-aggregation load-sharing mode { destination-ip |
destination-mac | destination-port | ingress-port |
mpls-label1 | mpls-label2 | mpls-label3 | source-ip |
source-mac | source-port } *
Command
display interface [ bridge-aggregation |
route-aggregation ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface { bridge-aggregation |
route-aggregation } interface-number [ brief ] [ |
{ begin | exclude | include } regular-expression ]
display lacp system-id [ | { begin | exclude |
include } regular-expression ]
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
display link-aggregation member-port
[ interface-list ] [ | { begin | exclude | include }
regular-expression ]
display link-aggregation summary [ | { begin |
exclude | include } regular-expression ]
83
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view