Polycom VVX 201 User Manual page 46

Setting the Headset Base Unit Options
Before you connect your headset to your phone and use EHS, you need to set the following options for your
specific headset model:
● For Jabra headsets, change the headset mode to DHSG on the headset base unit. For details, refer to
your headset documentation or contact Jabra support.
● For Plantronics headsets, change the coarse receive level to 3 and the transmit level to B on the
headset base unit. For details, refer to the guide that comes with your headset.
● For Sennheiser headsets, set the first DIP switch labeled 1 (DHSG) to the down position on the back of
the headset base unit. For additional details, see your headset's documentation or contact Sennheiser
support.
Enable Electronic Hookswitch
After you set the base unit options for your headset and connect your headset to your phone, you can enable
EHS.
T
ASK
1 Connect your headset and EHS adapter to your phone.
See the Quick Start Guide for your phone on
your phone.
2 Navigate to Settings > Basic > Preferences > Headset > Hookswitch Mode.
3 Select one of the below modes for your specific headset:
 Choose Jabra if an EHS-compatible Jabra headset is attached with an EHS cable or adapter.
 Choose Plantronics if an EHS-compatible Plantronics headset is attached with an EHS cable or
adapter.
 Choose Sennheiser if an EHS-compatible Sennheiser headset is attached with an EHS cable or
adapter. If your phone does not have a menu selection for Sennheiser, select Jabra instead.
 Choose Regular Mode (default) if another headset is attached.
R :
ELATED INFORMATION
Features for Hearing-Impaired Users Change the Volume
Changing Audio Settings
Change the Headset Mode
Headsets that come with a docking station have two modes: soft phone and desk phone mode. In order for you
Polycom Voice Support for information on connecting a headset to
39