Better Together Over Ethernet; Troubleshoot Polycom Btoe Connector Installation; Troubleshoot Polycom Btoe Connector Start Issues - Polycom VVX 201 Series User Manual

The message "USB device is full. Recording canceled"
is displayed when I pressed Start.
The recording stopped during a call.
The message "USB device removed unsafely.
Recording canceled" displayed when I removed my
USB flash drive during a call.
The message "Unsupported USB device attached"
displayed.

Better Together over Ethernet

Use the following solutions as a guide to resolving issues, problems, or common difficulties while
installing the Polycom BToE Connector or pairing your devices.

Troubleshoot Polycom BToE Connector Installation

If the Polycom BToE Connector fails to install, download and reinstall the application from
Support on your computer.
If the application installation continues to fail, find the log file for the installation error and call
Technical Support. The technical support representative needs the log file to understand why the
installation failed.
If you cannot access the log files, contact your system administrator for assistance.
Procedure
1. Open the Start menu and select your user name.
2. Select the folders AppData > Local > Temp > MSI*.LOG.

Troubleshoot Polycom BToE Connector Start Issues

If the Polycom BToE Connector successfully installs, but the application fails to start or you experience
other application-related failures, uninstall the Polycom BToE Connector and reinstall the application.
If the application still does not start or you experience other related issues, find the log file showing the
failed to start error and call
log file to understand why the application failed to start.
If you cannot access the log files, contact your system administrator for assistance.
Procedure
1. Open the Start menu and select your user name
Polycom, Inc.
Polycom Technical Support. The technical support representative needs the
Check that there is sufficient space on the USB flash
drive.
If the USB flash drive becomes full during recording,
recording stops and the message "USB device is full.
Recording stopped" is displayed.
Delete previous recordings to make space on the USB
drive.
Do not remove the USB flash drive while recording. If
you want to remove the drive during a call, press Stop,
and then remove the drive.
Refer to Feature Profile 37477: Using Headsets with
Polycom Phones on Polycom Support
devices supported on Polycom phones.
Troubleshooting
for a list of USB
Polycom Voice
Polycom
155