Disconnect Your Headset; Using Bluetooth Headsets With Vvx 600 Phones - Polycom VVX 201 Series User Manual

Controlling Calls with Electronic Hookswitch
After you have followed the procedures for connecting your headset and enabled EHS, you can use the
controls on your headset to answer, mute, and end calls. If supported on your headset, you can also
place calls on hold. See your headset's user documentation for information on controlling calls from your
headset.
When you are in an active call and you receive an incoming call, you cannot use the hookswitch control
on your headset to place the active call on hold and answer the incoming call. Pressing the hookswitch
control on the headset ends the active call and answers the incoming call. To place the existing call on
hold and answer the incoming call, answer the call on your phone.
Related Links
Features for Mobility-Impaired Users

Disconnect Your Headset

If you want to disconnect or change your headset, you need to properly detach your headset from your
phone.
Procedure
1. Navigate to Settings >Basic > Preferences > Headset > Hookswitch Mode.
2. Select Regular Mode.
3. Remove the EHS adapter from the serial port on the back of the phone.

Using Bluetooth Headsets with VVX 600 Phones

VVX 600/601 phones support Bluetooth headsets as well as analog and USB headsets. If your system
administrator has enabled Bluetooth capability for your phone, you can use a Bluetooth headset to handle
calls. When a Bluetooth headset is connected and in use, the headset key
multiple types of headsets connected to your phone, the Bluetooth headset is used automatically for all
calls.
This section provides you with information on how to enable Bluetooth on your VVX 600/601, how to pair
and connect your Bluetooth headset, how to use your Bluetooth headset with your phone, and how to
disconnect and remove your headset.
Enable Bluetooth and Connect a Headset
In order to use a Bluetooth headset with your phone, you need to enable Bluetooth, pair your headset,
and connect your Bluetooth device to your phone. You can pair up to four Bluetooth headsets with your
phone; however, you can connect only one headset at a time.
The following instructions are intended as a guide, and do not apply to all Bluetooth devices. You can
usually find instructions for your headset on the device manufacturer's web site.
Procedure
1. Navigate to Settings >Basic > Bluetooth Settings > Bluetooth Radio.
The Bluetooth Radio screen is displayed.
2. Tap On.
Polycom, Inc.
on page 146
Phone Accessories and Computer Applications
glows blue. If you have
121