Polycom VVX201 Features Manual

Telstra VVX201 Phone Feature Guide
If you are required to initially configure your IP
phone you will be advised of the Username and
Password. This information only needs to be
entered once via the QSetup soft key.

Press the QSetup soft key

Select the Server User field

Enter the Server User credentials (obtain
this information from Telstra.
This number will be your phone number)

Select the Server Password field

Select the Mode soft key and tap 123 (to
select numbers)

Enter the Server password (obtain this
information from Telstra)

Press Save Config to Save the Config
You will now need to manually reboot the phone

Press the Home button
Telstra VVX201 Phone Feature Guide | April 2016

Select Settings

Select Basic, using the navigation button
scroll down

Select Restart Phone

Select the Yes soft key (to confirm)
Note 1: Restarting the phone may take a few
minutes
Note 2: If your phone has been preconfigured
the QSetup soft key will not be visible
Note 3: This is only required for phones that are
on DMS (Device Management System)
platform.
To view the Home view main menu, press

To return to the Line View, press

To select a menu item, press the Home
button, scroll through the icons and select
the relevant option ie Settings or Directories
by pressing the Select button in the middle
of the Navigation button.

The VVX101 is a black and white screen
device.
To move through the pages press the right or
left arrow buttons on the Navigation button.
Call – Select Call to display Dialler
enter a number to place a call
Page 1