Setting Up The Unit; Adjusting The Touch Panel; Setting The Clock - Sharp OZ-800 Operation Manual

Setting up the unit

After battery installation, the unit takes you through various steps needed to setup
the unit before use. It is recommended to complete the entire setup procedures
described below.

Adjusting the touch panel

The Calibration screen appears.
1.
Tap the center of the target with the stylus.
The target moves to another position.
2.
Repeat step 1 until you tap the target at the bottom right of the screen.
3.
Tap "Q" followed by "P" on the tablet keyboard according to the instructions
displayed on the screen.
Adjusting the LCD contrast
After adjusting the touch panel, the Contrast screen appears.
1.
Press or tap icons on the screen to adjust the LCD contrast.
2.
Tap "NEXT".

Setting the CLOCK

After setting the LCD contrast, the Time/Date Setting screen appears.
City:
1.
Highlight "City" by pressing
2.
Select the desired city by pressing
and press .
and press
Getting Started
.
13