Pre-Configured Presets; Pre-Configured Sequences; Adjusting The Intensity Of Presets - ETC ColorSource Linear Installation Manual

ETC Installation Guide
ColorSource Linear v1.7

Pre-configured presets

Preset
1
2
3
4
5
6

Pre-configured sequences

Sequence
1
2
3
4
5

Adjusting the intensity of presets

1: Ensure that DMX data is not present.
2: Press the Mode button to access the Presets/Sequences menu, and
then press the Up and Down buttons to select the preset that you
want to edit.
3: Press and hold the Mode button for 3 seconds. The display shows

4: Press the Up and Down buttons to change the intensity level of the
preset in real time.
5: Press the Mode button to confirm your selection and return to the
Presets/Sequences menu.
The display will automatically return to the Presets/Sequences menu after
10 seconds of inactivity, and edits to the preset intensity will not be saved.
ColorSource Linear v1.7
Name
3200K White
5600K White
Red
Green
Blue
Cyan
Name
Rainbow Fast
Rainbow Slow
Warm Colors Fast
Cool Colors Fast
Random
: ## where the number is an intensity level from
Preset
7
8
9
10
11
12
Page 13 of 20
Name
Magenta
Yellow
Orange
Light Yellow
Light Blue
Light Pink
  
, or .
ETC