Pre-Configured Presets; Pre-Configured Sequences - ETC ColorSource Spot V 1.0 Installation Manual

ETC Installation Guide
ColorSource Spot V1.0
Play Presets and Sequences
The fixture has twelve factory-configured presets and five factory-
configured sequences. When you play a preset or sequence on a fixture:
The same preset number or sequence number plays on any
•
connected fixtures that are not receiving DMX.
If you power down the fixture, the preset or sequence resumes when
•
you power it on again.
You can re-record presets and sequences through an RDM device or
manually on the fixture. See
1. Press the Mode button to activate the Presets/Sequences menu. The
last active preset or sequence plays automatically. (If DMX data is
present, the current preset or sequence plays in the background and
DMX data continues to take priority.)
2. Press the Up button or Down button as needed to scroll through the
available presets and sequences.
3. To stop the selected preset or sequence, press the Mode button a
second time. The display will revert to show the DMX start address.
Pre-configured Presets
Preset
1
2
3
4
5
6
Pre-configured Sequences
Sequence Name
1
2
3
4
5
ColorSource Spot V
Re-record Presets on the next page
Name
3200 K White
5600 K White
Red
Green
Blue
Cyan
Rainbow Fast
Rainbow Slow
Warm Colors Fast
Cool Colors Fast
Random
Page 11 of 20
Preset Name
7 Magenta
8 Yellow
9 Orange
10 Light Yellow
11 Light Blue
12 Light Pink
.
ETC