Pre-Configured Presets; Pre-Configured Sequences - ETC ColorSource Spot jr v2.0 Installation Manual

ETC Installation Guide
ColorSource Spot jr v2.0/v3.0
Play Presets and Sequences
The fixture has twelve factory-configured presets and five factory-configured
sequences. When you play a preset or sequence on a fixture:
The same preset number or sequence number plays on any connected
•
fixtures that are not receiving DMX.
If you power down the fixture, the preset or sequence resumes when
•
you power it on again.
You can re-record presets and sequences through an RDM device or manually
on the fixture. See
1. Press the Mode button to activate the Presets/Sequences menu. The last
active preset or sequence plays automatically. (If DMX data is present, the
current preset or sequence plays in the background and DMX data
continues to take priority.)
2. Press the Up button or Down button as needed to scroll through the
available presets and sequences.
3. To stop the selected preset or sequence, press the Mode button a second
time. The display will revert to show the DMX start address.
Pre-configured Presets
Preset
1
2
3
4
5
6
Pre-configured Sequences
Sequence Name
1
2
3
4
5
ColorSource Spot jr
Re-record Presets on the facing page
Name
3200 K White
5600 K White
Red
Green
Blue
Cyan
Rainbow Fast
Rainbow Slow
Warm Colors Fast
Cool Colors Fast
Random
Preset
7
8
9
10
11
12
Page 8 of 16
.
Name
Magenta
Yellow
Orange
Light Yellow
Light Blue
Light Pink
ETC