Pre-Configured Presets; Pre-Configured Sequences; Adjusting The Intensity Of Presets - ETC ColorSource PAR Installation Manual

ETC Installation Guide
ColorSource PAR v1.5

Pre-configured presets

Preset
1
2
3
4
5
6

Pre-configured sequences

Sequence
1
2
3
4
5

Adjusting the intensity of presets

1: Ensure that DMX data is not present.
2: Press the Mode button to access the Preset/Sequence menu, and then
press the Up and Down buttons to select the preset that you want to
edit.
3: Hold the Mode button for 3 seconds. The display shows
the number is an intensity level from
4: Press the Up and Down buttons to change the intensity level of the
preset in real time.
5: Press the Mode button to confirm your selection and return to the
Preset/Sequence menu.
The fixture will automatically return to the Preset/Sequence menu after
10 seconds of inactivity without saving edits to the preset intensity. This
cancels unsaved changes.
ColorSource PAR v1.5
Name
3200K White
5600K White
Red
Green
Blue
Cyan
Name
Rainbow Fast
Rainbow Slow
Warm Colors Fast
Cool Colors Fast
Random
Page 7 of 12
Preset
7
8
9
10 Light Yellow
11 Light Blue
12 Light Pink
  
, or .
Name
Magenta
Yellow
Orange

: ## where
ETC