Locking The User Interface; Updating The Fixture Software - ETC ColorSource Linear Installation Manual

ETC Installation Guide
ColorSource Linear v1.7

Locking the user interface

After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1:
2:

Updating the fixture software

ETC recommends using UpdaterAtor software to manage software updates.
For more information on UpdaterAtor, see the
Guide
, which you can download for free from etcconnect.com.
When you add a ColorSource fixture running a newer software version or
update a ColorSource fixture to a newer software version using UpdaterAtor,
you can use that fixture to push the newer software version to all connected
ColorSource fixtures.
You can push newer software versions from a connected fixture only on
ColorSource fixtures running software v1.3.0 or newer. Use UpdaterAtor to
update individual fixtures running versions older than v1.3.0.
1:
2:
3:
4:
ColorSource Linear v1.7
Press and hold the Up and Down buttons simultaneously for 3
seconds. The display will show
is locked.
To unlock the user interface, press and hold the Up and Down buttons
simultaneously for 3 seconds.
Remove power and DMX from the master fixture that is running the
software version that you want to push to other fixtures.
Press and hold the Up and Down buttons simultaneously while
restoring power.
The display will show
selected.
Press the Mode button to start the update process.
• The display will alternate between
complete while updating.
• The master fixture will reboot once the update is complete.

to indicate that the user interface

to indicate the update mode is

Page 14 of 20
UpdaterAtor Software Quick
and the percentage
ETC