Table of Contents
Advertisement
ETC Installation Guide
ColorSource Linear Pearl v1.7
Pre-configured presets
Preset
1
2
3
4
5
6
Adjusting the intensity of presets
1:
Ensure that DMX data is not present.
2:
Press the Mode button to access the Presets menu, and then press the
Up and Down buttons to select the preset that you want to edit.
3:
Press and hold the Mode button for 3 seconds. The display shows
4:
Press the Up and Down buttons to change the intensity level of the
preset in real time.
5:
Press the Mode button to confirm your selection and return to the
Presets menu.
The display will automatically return to the Presets menu after 10 seconds of
inactivity, and edits to the preset intensity will not be saved.
Locking the user interface
After you have set up the fixture, you can lock the user interface to prevent
additional changes.
1:
Press and hold the Up and Down buttons simultaneously for 3
seconds. The display will show
is locked.
2:
To unlock the user interface, press and hold the Up and Down buttons
simultaneously for 3 seconds.
ColorSource Linear Pearl v1.7
Name
3000K White
3200K White
3500K White
4000K White
4200K White
4500K White
: ## where the number is an intensity level from
Preset
7
8
9
10
11
12
to indicate that the user interface
Page 15 of 20
Name
4700K White
5000K White
5200K White
5600K White
6000K White
6450K White
, or
.
ETC
Advertisement
Table of Contents
Need help?
Do you have a question about the ColorSource Linear Pearl and is the answer not in the manual?
Questions and answers