C.hig - Setting Analog Output Maximum - gefran 650 Abbreviated Manual

Acronym
C.LO
The parameter shows and sets the minimum analog output value.
You can change the displayed value with the
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement:
Options:

4.25.15. C.HIG - Setting analog output maximum

Acronym
C.HIG
The parameter shows and sets the maximum analog output value.
You can change the displayed value with the
To check the real voltage/current value on the output during calibration, measure it with a voltmeter/ammeter.
Unit of measurement:
Options:
40524-04 Rev0
Gefran 650/1250/1350 Temperature Controller – Abbreviated Manual
Scrolling message
Converter points
0...65535
Scrolling message
Converter points
0...65535
and keys.
and keys.
4. CONFIGURATION
Submenu Attributes
US.CAL R W
Submenu Attributes
US.CAL R W
135