Grop.r - Group Of Parameters Assigned To Ramp; Grop.h - Group Of Parameters Assigned To Hold; Msg.r - Message Associated With The Ramp; Msg.h - Message Associated With The Maintenance - gefran 650 Abbreviated Manual

4. CONFIGURATION

4.6.25. GROP.R - Group of parameters assigned to ramp

Acronym
GROP.R CONTROL PARAMETER GROUP DURING STEP RAMP
The parameter shows and sets the group of control parameters assigned to the step during the ramp.
PID.G.N is settable on the MODE submenu.
Unit of measurement:
Options:

4.6.26. GROP.H - Group of parameters assigned to hold

Acronym
GROP.H CONTROL PARAMETER GROUP DURING STEP HOLD
The parameter shows and sets the group of control parameters assigned to the step during the hold.
PID.G.N is settable on the MODE submenu.
Unit of measurement:
Options:

4.6.27. MSG.R - Message associated with the ramp

Acronym
MSG.R SCROLLING MESSAGE DURING STEP RAMP
The parameter displays and sets the message number associated with the step during the ramp, which is the message
that will appear on the display to scroll to the step you are configuring
More information on the scrolling message can be found in the section "3.1.2.2 Scrolling messages" on page 34.
Setting it to "0" will not show any messages.
Unit of measurement:
Options:

4.6.28. MSG.H - Message associated with the maintenance

Acronym
MSG.H SCROLLING MESSAGE DURING STEP HOLD
The parameter displays and sets the message number associated with the pitch during the maintenance, which is the
message that will appear on the display to scroll to the step you are configuring
More information on the scrolling message can be found in the section "3.1.2.2 Scrolling messages" on page 34.
Setting it to "0" will not show any messages.
Unit of measurement:
Options:
62
40524-04 Rev0
Gefran 650/1250/1350 Temperature Controller – Abbreviated Manual
Scrolling message
Number
0...PID.G.N = Number of group. If 0, parameters are those for controller settable on PID submenu
Scrolling message
Number
0...PID.G.N = Number of group. If 0, parameters are those for controller settable on PID submenu
Scrolling message
ID number of the message
0...25
Scrolling message
ID number of the message
0...25
Submenu Attributes
PR.SPT R W
Submenu Attributes
PR.SPT R W
Submenu Attributes
PR.SPT R W
Submenu Attributes
PR.SPT R W