S.tune - Enabling Self-Tuning; Soft.s - Enabling Soft-Start; Soft.t - Soft-Start Time; A.tune - Enabling Auto-Tuning - gefran 650 Abbreviated Manual

4.13.1. S.TUNE - Enabling Self-Tuning

Acronym
S.TUNE SELF TUNING ENABLE
The parameter shows and sets enabling of Self-Tuning.
For more information on the Self-Tuning function, see paragraph "5.10.3. Self-Tuning" on page 145.
Unit of measurement:
Options:

4.13.2. SOFT.S - Enabling Soft-Start

Acronym
SOFT.S SOFT START ENABLE
The parameter shows and sets enabling of Soft-Start.
For more information on the Self-Start function, see paragraph "5.9. Soft-Start" on page 144.
This parameter appears only if S.TUNE = OFF.
Unit of measurement:
Options:

4.13.3. SOFT.T - Soft-Start Time

Acronym
SOFT.T SOFT START TIME
The parameter shows and sets Soft-Start time, i.e., the time that the control output needs to reach the value required by
the PID.
This parameter appears only if SOFT.S = On.
Unit of measurement:
Options:

4.13.4. A.TUNE - Enabling Auto-Tuning

Acronym
A.TUNE AUTO TUNING ENABLE
The parameter shows and sets enabling of Auto-Tuning.
For more information on the Auto-Tuning function, see paragraph "5.10.4. Auto-Tuning" on page 146.
Unit of measurement:
Options:
40524-04 Rev0
Gefran 650/1250/1350 Temperature Controller – Abbreviated Manual
Scrolling message
-
OFF = Self-Tuning disabled
On = Self-Tuning enabled at next power-on only
On.AL = Self-Tuning enabled at all power-ons
Scrolling message
-
OFF = Soft-Start disabled
On = Soft-Start enabled at next power-on
Scrolling message
Minutes
0.0...500.0
Scrolling message
-
OFF
= Auto-Tuning disabled
On
= Auto-Tuning enabled
4. CONFIGURATION
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
Submenu Attributes
PID R W
85